What You Need To Know About Skateboard Bearing Lubrication

If you're a skateboarder, you know that your bearings are one of the most important parts of your setup. They keep your wheels spinning smoothly and allow you to roll faster and farther. But if your bearings aren't properly lubricated, they can quickly become damaged and start to make noise. This can not only ruin your riding experience, but it can also be dangerous.

That's why it's so important to regularly lube skateboard bearings. By doing so, you can help extend their lifespan and keep them performing at their best.

How to Lube Skateboard Bearings

Lubing your bearings is a simple process that only takes a few minutes. Here's how to do it:

Remove the wheels from your skateboard.

Use a skate tool to remove the bearings from the wheels.

Apply a small drop of bearing oil to each bearing. Be careful not to over-lubricate, as this can attract dirt and debris.

Reinstall the bearings into the wheels and tighten the axle nuts.

Put the wheels back on your skateboard.

Types of Bearing Lubricants

There are a variety of bearing lubricants available on the market, each with its own advantages and disadvantages. Here's a brief overview of some of the most popular types:

Type of Lubricant	Advantages	Disadvantages
Oil	- Inexpensive - Easy to apply - Long-lasting	- Can attract dirt and debris - Can leak out of bearings
Grease	- Provides better protection from dirt and debris - Less likely to leak out of bearings	- More difficult to apply - Can be messy
Dry Lube	- Does not attract dirt and debris - Easy to apply	- Not as long-lasting as oil or grease - Can be expensive

How Often Should I Lube My Bearings?

The frequency with which you need to lube your bearings will vary depending on how often you ride, the type of riding you do, and the environment you ride in. However, as a general rule of thumb, it's a good idea to lube your bearings every 2-3 months or after every 5-10 rides.

Common Mistakes to Avoid

Here are a few common mistakes to avoid when lubing your bearings:

Over-lubricating your bearings. This can attract dirt and debris, which can damage your bearings.

Using the wrong type of lubricant. Not all lubricants are created equal. Some lubricants can actually damage your bearings.

Not lubing your bearings regularly. This can lead to premature wear and tear.

Success Stories

Properly lubed bearings can make a big difference in the performance of your skateboard. Here are a few success stories from skateboarders who have seen the benefits of lubing their bearings:

"I used to have to replace my bearings every few months. But since I started lubing them regularly, they've lasted much longer." - John Smith, professional skateboarder

"My bearings used to make a lot of noise. But after I lubed them, they're now much quieter." - Jane Doe, amateur skateboarder

"I used to get a lot of flat spots on my wheels. But since I started lubing my bearings, I haven't had a single flat spot." - Mike Jones, skateboarder

Conclusion

By following these tips, you can help keep your skateboard bearings in top condition and extend their lifespan. This will not only improve your riding experience, but it can also save you money in the long run.

What You Need To Know About Skateboard Bearing Lubrication